Putting pictures in post

miss_maddy2007 · Member Joined: 01 Sep 2005 Posts: 27

Could anyone tell me how to put pics of my pets in my posts. They are copied on my computer, I just dont know what to do from there...thanks!

Chessmind · Posted: Mon Oct 03, 2005 1:43 am Post subject:

Hi.

To make an avatar (image below your member name):

1) You need a small pic (around 80X80). If you can make any of your pics this small, just right click on the pic, then click on "properties" and copy the URL address. Then come back here to Auspet. If you can't make your pics small try using www.tinypic.com or www.photobucket.com.

2) Click on your profile. Scroll down to the bottom. You will see "Link To Off-Site Avatar". Paste the URL address here and then click submit.

To post a pic in your post:

1) Go to www.snapfish.com (it's free).

2) Upload your pics.

3) Right click on the pic and then click on "properties" and copy the URL address.

4) Paste the URL address with the "img" tags. You can either click on the "img" tags above or you can type it in. It should look like this:

[img]theURLaddresshere[/img]

5) Then click submit.

Good luck.

miss_maddy2007 · Member Joined: 01 Sep 2005 Posts: 27

thanks...that help me figure it out...

sunset05 · Posted: Mon Oct 03, 2005 2:22 pm Post subject:

You could also use photobucken.com. It is also free to join.

Then when you go there you can click on browse and go to you pictures and open the one you want. It's name will show up in photobucket. Then click submit in photobucket and it will appear lower on that screen.

Then just follow what Chessmind says. You might want to preview it before you submit it so if the picture is too big you can go back to photobucket and edit it to a smaller size and then redo it in your response before you submit it.

This is only for a pictuer in your post and not an avatar (little picture under you name).

Hope this helps.